What drywall Installation and Repair covers
Drywall installation covers boarding, taping and finishing. The finish level matters more than most people expect: a wall lit across its face by a window or a downlight shows every imperfection that a wall lit from the front would hide.
Drywall installation covers boarding, taping and finishing. The finish level matters more than most people expect: a wall lit across its face by a window or a downlight shows every imperfection that a wall lit from the front would hide.
Boarding and finishing walls to the level the lighting in the room actually demands.
Waystar carries out this work on residential and commercial property in Brooklyn and across New York City. Every project starts with a look at the building, and the scope, the materials and the figures are written down before anything begins.
When might you need it?
These are the signs owners usually notice first.
- Walls that look wavy or show joints under raking light
- Cracks appearing along taped joints
- Damage from a leak that has now been fixed
- Nail or screw heads showing through the paint
- New framing that needs boarding and finishing
What the work involves
- Framing checked for plumb before any board goes up
- Board type selected for the room, including moisture areas
- Boards fixed at the correct centres and screw pattern
- Joints taped and coated in successive passes
- Finish level agreed to suit the lighting in the room
- Surfaces sanded and left ready for decoration
How the process works
Check the frame
Boarding over an out of plumb frame produces a wavy wall every time.
Board the room
Correct board type and fixing pattern for the wall and its conditions.
Tape and coat
Joints taped, then coated in successive passes with drying time between.
Sand and inspect
Surfaces sanded and checked under the room lighting before handover.
What you get
- A finish level matched to how the room is actually lit
- Board specified for the conditions, including wet areas
- Joints coated in passes rather than filled in one go
What affects the scope
- Area to be boarded and the finish level required
- How the room is lit, which sets the finish standard
- Whether moisture or fire rated board is needed
- Ceiling height and access requirements
This is a preliminary planning range, not a quote. A property visit is required before any price is confirmed.
Frequently asked questions
Why do my walls look wavy?
Usually the finish level was lower than the lighting demanded. A wall lit across its face needs more coats and more sanding than one lit from the front.
Why do joints crack?
Movement in the frame, insufficient taping, or coats applied before the previous one had dried. All three are avoidable.
Can you patch a small hole?
Yes. Small repairs are straightforward, though matching an existing texture takes more care than the patch itself.
Services often needed alongside this
This service is part of Carpentry and Interior Finishes.