What framing covers
Framing forms the structure of walls, floors and roofs. Accuracy at this stage carries through the whole project, because drywall, trim, cabinetry and flooring all inherit whatever is out of plumb or out of level in the frame beneath them.
Framing forms the structure of walls, floors and roofs. Accuracy at this stage carries through the whole project, because drywall, trim, cabinetry and flooring all inherit whatever is out of plumb or out of level in the frame beneath them.
Timber and metal stud framing set out accurately, because every finish after it inherits the error.
Waystar carries out this work on residential and commercial property in Brooklyn and across New York City. Every project starts with a look at the building, and the scope, the materials and the figures are written down before anything begins.
When might you need it?
These are the signs owners usually notice first.
- New walls needed to form or divide rooms
- Existing framing damaged by water or insects
- Floors that flex or bounce underfoot
- A frame out of plumb, making finishes visibly off
- A structure needing preparation for new finishes
What the work involves
- Set out checked against the actual building, not the drawing alone
- Existing structure assessed where new frame ties into it
- Plates fixed to line and studs set at the correct centres
- Openings framed with correct headers and support
- Blocking installed where fixings will later be needed
- Frame checked for plumb, level and line before closing up
How the process works
Set out against the building
Older buildings are rarely square, so the set out reconciles the drawing with reality.
Fix the plates
Lines are established at floor and ceiling before any stud goes up.
Stud and frame openings
Studs at correct centres, headers sized to what they carry.
Block and check
Blocking added where fixings will be needed, then the frame is checked before boarding.
What you get
- A frame that is genuinely plumb and level
- Blocking already in place for future fixings
- Openings framed correctly rather than adjusted later
What affects the scope
- Whether the frame is loadbearing or partition only
- How out of square the existing building is
- Number of openings and services passing through
- Timber or metal stud, and the finish it will carry
This is a preliminary planning range, not a quote. A property visit is required before any price is confirmed.
Frequently asked questions
Does framing accuracy really matter?
More than almost anything else. Every finish sits on it, and a wall that is out of plumb shows in the trim, the tiling and the cabinetry.
What is blocking for?
Solid fixing points behind the board for things like cabinets, rails and TV mounts. Adding it during framing costs almost nothing; adding it later means opening the wall.
Timber or metal stud?
Both work. Metal is common for non loadbearing partitions and is dimensionally stable; timber is used where the wall carries load or heavy fixings.
Services often needed alongside this
This service is part of Carpentry and Interior Finishes.